Approved Group International
Agi restoration decontamination and dehumidification on 4 lines of injection moulding machines photograph
All insights

Decontamination and Dehumidification on 4 lines of injection moulding machines

At about 0630 hours on Sunday, 29 January 2017, a fire occurred at the premises of a injection moulding factory. The incident was first discovered by their…

1 min read

At about 0630 hours on Sunday, 29 January 2017, a fire occurred at the premises of a injection moulding factory. The incident was first discovered by their technician who was on foot patrol. When he entered the front section of the block where the machines were, he saw reflection of light from the rear section of the block. He then walked to the rear section towards the last 2 injection moulding machines and noticed the fire raging. Approved Forensics Sdn Bhd (AFSB) was appointed by the insured to decontaminate and dehumidify the 4 lines of injection moulding machines as they were contaminated by soot and extinguishment water.

Our restoration specialists took about 2 days per machine to fully complete the task. Tests were conducted post-restoration and some minor repairs and part replacement were required to fully operate the said machines at their pre-loss levels.

With AGI’s professional restoration, the claim was reduced from potentially “total loss” to only restoration costs. More importantly, the down time was reduced from months to mere days.

Agi restoration decontamination and dehumidification on 4 lines of injection moulding machines photograph
Agi restoration decontamination and dehumidification on 4 lines of injection moulding machines photograph
Agi restoration decontamination and dehumidification on 4 lines of injection moulding machines photograph
Agi restoration decontamination and dehumidification on 4 lines of injection moulding machines photograph
Agi restoration decontamination and dehumidification on 4 lines of injection moulding machines photograph
Agi restoration decontamination and dehumidification on 4 lines of injection moulding machines photograph
Agi restoration decontamination and dehumidification on 4 lines of injection moulding machines photograph

Keep reading

Related insights

All insights
  • Satellite view of monsoon cloud systems over Southeast Asia and Australia

    ArticleDisaster Restoration

    Industrial Flood Restoration Malaysia

    Industrial flood restoration in Malaysia, Singapore and Indonesia. IICRC protocols, real cases, and what to do in the first 72 hours after a flood.

    By AGI Team8 min read
    Read the article
  • Restoration of air duct system

    ArticleDisaster Restoration

    Restoration of Air Duct System

    After a fire, smoke, soot and odors can linger and further damage your premises and threaten your health. Damaging smoke and soot spreads to other rooms in your…

    By AGI Team1 min read
    Read the article
  • Commercial dehumidifier and air movers drying a water-damaged office room

    Technical NoteDisaster Restoration

    Dehumidification Process

    The basic functional principle of drying dehumidifier is really quite simple. A fan draws in humid air and carries it through a refrigerated evaporator.

    By AGI Team1 min read
    Read the technical note

24/7 response

Does this affect a claim you are handling?

Send us the detail and we will tell you what a proper investigation would need to establish.