
ArticleDisaster Restoration
Industrial Flood Restoration Malaysia
Industrial flood restoration in Malaysia, Singapore and Indonesia. IICRC protocols, real cases, and what to do in the first 72 hours after a flood.

The basic functional principle of drying dehumidifier is really quite simple. A fan draws in humid air and carries it through a refrigerated evaporator.
Iron and steel will not rust if the air in contact with the surface has a relative humidity below 50% relative humidity (RH).
Condensation can lead to many problems such as corrosion or short-circuit in electrical systems.
Mould and fungus formation is prevented if the surrounding air is kept below 70%RH.
Bacteria need humidity to survive and multiply.
Bacteria need humidity to survive and multiply.
Bad smell will drastically be reduced if the relative humidity is kept below 50%RH.
The basic functional principle of drying dehumidifier is really quite simple. A fan draws in humid air and carries it through a refrigerated evaporator. The air is cooled well below its dew point. The water condenses on the cold surface of the evaporator and drips into a water container or is led directly to a drain. Then the cold dry air continues through a hot condenser which heats it up and returns it to the room to pick up new humidity. This procedure is continued until the desired condition is achieved. Our dehumidification system uses applied psychometric science, a proven process that properly manages dehumidification and temperature to most effectively and efficiently facilitate evaporation Industrial Air Movers create a vortex, similar to the motion of a tornado. A DHM600 Dehumidifier draws in cool, wet air and blows out warm, dry air. Our dehumidification system helps ensure the best possible outcome. We can save almost everything, drywall, wood, carpets and most contents! We measure the moisture content of materials, monitor and log progress so we know the actual drying time and ensure restoration to the appropriate dry standard.
Keep reading

ArticleDisaster Restoration
Industrial flood restoration in Malaysia, Singapore and Indonesia. IICRC protocols, real cases, and what to do in the first 72 hours after a flood.

ArticleDisaster Restoration
When a fire occurs inside a pharmaceutical or food manufacturing facility, the visible damage often represents only a small part of the overall problem.

ArticleDisaster Restoration
At about 0630 hours on Sunday, 29 January 2017, a fire occurred at the premises of a injection moulding factory. The incident was first discovered by their…
24/7 response
Send us the detail and we will tell you what a proper investigation would need to establish.